BOILER MOUNTING
7
The vertical chimney pipe can be installed partially inside as in Fig 3, with a maximum of two
90
o
elbows. The vertical chimney pipe must have a height of minimum 2 m. All chimney
connections must be sealed with a temperature resistant silicon gasket.
Fig 3.
Chimney connection
3.4.
Air intake
The necessary for combustion air intake of the boiler is absorbed externally through an air intake
pipe that must be installed, as seen above. The air intake pipe must be protected with a grate,
according to UNI 10683.
The air intake can also be absorbed from the installation space. In this case, special care must
be taken so that sufficient air supply is given to the installation room by means of air intakes
surfaces, which must be protected with a grate, according to UNI 10683.
Periodically, the air intake pipes must be controlled against blocking.
