ThermoSphere HA24-100M, Инструкция по эксплуатации

Страница: 7 / 15

INSTALLATION
Hardware needed
You will also need the following hardware, which can be purchased from your local hardware
store or electrical supply store:

Electric wire in the adequate gauge and length for your application

Proper size fuse or breaker for your heater’s amperage

Proper wire connectors for your application

Fasteners appropriate for your application that are strong enough to hold the unit
Mounting the Bracket
Refer to Figures 5
1. Locate a wood stud in the wood ceiling joist. If you cannot locate a wood stud, you must
install a wood piece on the ceiling as this heater must be securely fastened.
2. Remove the mounting bracket from the heating unit by loosening bracket screws with a
wrench and slipping the handle off over the screw heads.
3. Place a washer on screws before inserting through the holes in the mounting bracket and
screw them securely into a ceiling joist.
HANGING THE HEATER