ThermoSphere HA24-100M, Инструкция по эксплуатации

Страница: 14 / 15

OPERATING INSTRUCTIONS
Note: After setting an external thermostat to control the heater, the power
selection switch on the unit will be the only working function on the heater itself.
TO PROTECT THE HEATING ELEMENT
This unit has a fan delay function to provide warm air when it is first turned on. When
the heater is turned off, the fan will continue working for a short while to cool the
heating element; then the fan will automatically turn off. This feature helps maximize
the heater’s life.
WARNING: the heater must be properly installed before it is used.
SETTING THE THERMOSTAT
1) Rotate thermostat knob clockwise to its highest position; the amber POWER
INDICATOR will turn on.
2) Once the room reaches your desired comfort level, rotate thermostat knob counter-
clockwise until a click is heard, then rotate it slightly clockwise.
Your heater will now cycle on and off to maintain your set room temperature.
POWER SELECTION SWITCH
Using the SELECTION SWITCH, select the heating
output: I for 7500W, II for 10000W
I II
POWER SELECTION SWITCH
Figure 15
:
THERMOSTAT
SELECTION SWITCH
CAUTION INDICATOR
(Red)
POWER INDICATOR
(AMBER)