Installation guide
Installation guide
Barrel Nº62
Barrel Nº62
BARRELS
BARRELS
STEP SEVEN
Measure steel bands (I) to ensure
correct length of 276,” +/- 1/2” is
acceptable.
Install steel bands (I) by wrapping
bands around barrel prior to
connecting with bolts and nuts (U).
Place steel bands evenly around
barrel, covering screw heads.
Measure from steel band to barrel
edge to ensure the steel band is
even.
Cover roof with roof tape.
Rub and smooth with pressure to
ensure adhesion.
Install interior aspen roof trim (O)
with 4.0 x 50 (P1) stainless steel
screws.
STEP EIGHT
Attach interior supporting leg (J1) to the
bench (J), install two sauna benches
on wall mounts using stainless steel
screws 4.2 x 70 (N1).
Hold the seat and leg assembly tight
to the sauna wall. Using a level, make
sure the bench seat is level from
front to back. This will ensure proper
placement.
Install backrests (J2) at your chosen
height using stainless steel screw
4.0 x 50 (P1).
STEP NINE
Install porch benches (K),
using screws 4.2 x 70 (N)
and 5.0 x 100 (X).
Hold the seat and leg
assembly tight to the sauna
wall. Using a level, make
sure the bench seat is level
from front to back. This will
ensure proper placement.
STEP SIX
Continue placing body staves (C)
tightly on both sides of the sauna
using rubber mallet, while fixing
body staves on the front panel with
4.2 x 70 screws and rear window
panel with 4.0 x 50 screws to
prevent glass breakage.
To finish
the roof top joint, use top stave
(H). Different thickness options are
provided to completely fill the gap.
WARNING!
Use shorter screw 4.0 x 50 (P)
for rear panel E1 otherwise
the window will be damaged!
P
N
H
R
I
O
P1
U
U
I
J2
P1
N1
J1
L
J
J2
N1
J1
J
N1
N1
C
.4” .6” .8” 1” 1.2”
Roof tape
Aspen
roof board
3-15/16´´
C
