THERMOROSSI PELLET AIR 11, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 42

Page 21
Installation, use and maintenance guide
Pellet Air 11 Stove body
After a few seconds the following screen will appear on the display:
2) Press the left Scroll Button and the following screen will appear (Select ON to activate).
ATTENTION: It will only be possible to activate the THERMOCOMFORT function and select ON in the previous screen if the
appliance detects the radio control signal. It is therefore recommended to ensure that the radio control is energised and within close
vicinity of the appliance.
3) To confirm the activation of the THERMOCOMFORT function or to exit the screen simply press the
Menu Button to return to
the initial screen.
The THERMOCOMFORT symbol will be present on the initial screen if the appliance is in the START or WORK stage:
The Thermocomfort function is automatically disabled when the appliance is OFF. It automatically reactivates at the next START
up.
To
disable the THERMOCOMFORT function simply repeat operations 1 and 2, but this time select the OFF command. The
function will be disabled immediately.
5.7 SHOW CHRONO: ON-OFF PROGRAMMING DISPLAY
This function enables you to consult the programmed ON/OFF cycles carried out through the CRONO function (See Para. 5.4).
Proceed as follows to view the ON/OFF cycles:
1) Press the
Menu Button five times quickly until the SHOW CRONO screen appears, and after a few seconds the following
screen will appear:
2) Press the left Scroll Button repeatedly to scroll and consult the programmings for all the days of the week.
Caution: the on-off programmings cannot be modified from the "SHOW CRONO" menu,
this menu is used only for viewing the programs that have been entered and/or edited through the "CRONO menu".