THERMOROSSI Ecotherm Compact Скачать руководство пользователя

Страница: 18 / 36

pag. 18

INSTALLATION

4.4.4 WEEKLY PROGRAMMING

The H20 appliance and Compact boiler can be programmed for a week with up to 2 on-off cycles for each day from

Monday to Sunday. When the appliance is running in programmed mode ( symbol active) the appliance self-adjusts its

combustion power according to the automatic cycle (see par. 4.3.1) and according to the room temperature thermostat (see

par. 4.6).

To access the programming mode the appliance must be in OFF mode (see drawing below ).

Press and hold down the button and press the button until the following graphic image appears on the

display:

Press the button and/or the button to set the hour for the appliance to start up for the ﬁrst time during the

day on Monday (e.g. 8.00 am). Then press the button to conﬁrm. The following graphic image will appear on the

display:

Press and hold down the button and/or the button to set the minutes for the hour at which the appliance

should start up for the ﬁrst time on Monday (e.g. 8:30). Now press the button to activate the programming mode

(symbol active).

Then press the button to conﬁrm. The following graphic image appears on the display:

Содержание Ecotherm Compact





































Результаты поиска

Содержание Ecotherm Compact

Отзывы:

Похожие инструкции для Ecotherm Compact

Бренды по названию

Популярные бренды

THERMOROSSI Ecotherm Compact, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Ecotherm Compact

Отзывы:

Похожие инструкции для Ecotherm Compact

Бренды по названию

Популярные бренды