Page 44
e manutenzione
THE APPLIANCE DOES NOT START
UP
THE SPARK PLUG IS DAMAGED
(DISPLAY SHOWS THE INSCRIPTION AL AC)
EMPTY THE BURNER AND CLEAN IT UP AS
INDICATED IN PARA. 8.
THEN REPLACE THE SPARK PLUG
THE APPLIANCE ACCUMULATES PELLETS IN THE
BRAZIER
CLEAN THE GLASS MORE OFTEN. FOLLOW THE
CLEANING AND MAINTENANCE INSTRUCTIONS
OF THE APPLIANCE (SEE PARA. 8)
SET THE OPERATING PROGRAM “level 2”
THE APPLIANCE OPERATES WITH FREQUENT ON-
OFF CYCLES
THE APPLIANCE NEEDS TO OPERATE AT A
HIGHER POWER LEVEL TO REDUCE THE ON/OFF
ACTIONS.
THE GLASS IS COVERED IN BLACK
SOOT
THE CAST BLADE POSITION IS NOT CORRECT/ NO
BLADE
POSITION THE BLADE CORRECTLY / MOUNT THE
BLADE
ROOM TEMPERATURE THERMOSTAT IS SET TOO
LOW
THE APPLIANCE OPERATES AT INTERVALS
THE APPLIANCE MUST OPERATE FOR MORE
HOURS WITH MORE POWER: SET A HIGHER
TEMPERATURE
THE ROOM IS TOO LARGE, THE WALLS ARE COLD
SEPARATE THE SPACES
THE APPLIANCE SHOULD OPERATE FOR MORE
TIME AND WITH MORE POWER
POOR PELLETS
USE A DIFFERENT TYPE OF PELLETS IN
COMPLIANCE WITH OM 7135
THE APPLIANCE SEEMS NOT TO HEAT
CEILINGS TOO HIGH OR PRESENCE OF STAIRS
THAT DISPERSE THE HEAT ELSEWHERE.
SEPARATE THE SPACES
THE APPLIANCE SHOULD OPERATE FOR MORE
TIME AND WITH MORE POWER
THE APPLIANCE IS OFF BUT THERE ARE
UNBURNT PELLETS IN THE BRAZIER
PELLET TANK IS EMPTY (DISPLAY SHOWS THE
INSCRIPTION “AL PE”)
EMPTY THE BURNER AND CLEAN IT UP AS
INDICATED IN PARA. 8.
THEN FILL UP THE TANK
THE PROGRAMMING AND/OR TIME
DO/DOES NOT REMAIN IN THE MEMORY
THE BUFFER BATTERY TYPE CR1632 INSTALLED IN
THE CONTROL PANEL IS EXHAUSTED.
REPLACE THE BATTERY
(SEE PARA. 8)
THE APPLIANCE CARRIES OUT RANDOM
COMMANDS THAT HAVE NOT BEEN SET
ON IT OR RANDOMLY VARIES THE
VENTILATION AND COMBUSTION LEVEL
THE “OPTIONAL WHITE HANDHELD RADIO
CONTROL” IS INSTALLED AND THERE IS ANOTHER
THERMOROSSI PRODUCT NEARBY
CHANGE THE CODE SELECTOR
(SEE PARA. 6)
THE APPLIANCE DOES NOT CARRY OUT
THE COMMANDS SET BY THE OPTIONAL
WHITE HANDHELD RADIO CONTROL
THERE IS ANOTHERTHERMOROSSI PRODUCT
NEARBY
CHANGE THE CODE SELECTOR
(SEE PARA. 6)
THE TANK COVER DOES NOT RUN/SLIDE
ON THE TUBE SCRAPER KNOBS
THE APPLIANCE IS VERY DIRTY
CLEAN IT UP AS INDICATED IN THE FIGURES 4A,
4B, 4C AND 5 (PARA. 8.2)
THE TANK COVER DOES NOT SLIDE
EASILY OR AT ALL
THERE ARE PELLETS IN THE RUNNERS
USE A VACUUM CLEANER TO REMOVE THE
PELLETS FROM THE RUNNERS
IF THE RECOMMENDED REMEDIES DO NOT SOLVE THE PROBLEM CONTACT A TECHNICAL ASSISTANCE SERVICE
Содержание DORICA MAIOLICA
