background image

Safety & Care Information

Safety Information

Thermorail Heated Towel Rails should be installed and tested by a qualified electrician 

and in accordance with current local regulations. We recommend that the rail is 

installed onto a flat uniform wall, with the bottom at least 600mm from the floor, with 

a 300mm clearance from permanent fixtures. Where possible the Thermorail Heated 

Towel Rail should be screwed into studs or if fixing to hollow walls suitable anchors 

should be used to ensure rail is secure. 

Please read and understand this installation guide in full before commencing 

installation. If you have any queries in regards to installation, please call 1300 368 

631. 

• Observe and adhere to electrical guidelines when placing your Thermorail in wet 

   areas

• Ensure any timers or switches used are installed in correct zones according to the 

IP rating of the timer/switch 

• Ensure that your Thermorail is protected by a suitably rated RCD circuit

• Do not use the towel rail to hold towels or other articles that have been in contact 

   with oil, petroleum based products or dry cleaning fluids

• This appliance is intended to warm and dry towels and therefore is hot to touch

   so when near young children or infirm persons, close supervision is necessary. 

• Do not immerse your Thermorail in any liquid

• Ensure the transformer is located no further than 2m from the Thermorail(s)

• Ensure the transformer is accessible and has adequate ventilation 

• Ensure that multiple rails connected to individual transformers are wired in parallel 

to the switch/timer.

• This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified persons in order to avoid a hazard.

WARNING:

 In order to avoid a hazard for very young children, this appliance should be 

installed so that the base of the rail is at least 600mm above the floor.

Care Information

The Stainless Steel finish of your Thermorail Heated Towel Rail is hard wearing and easy 

to maintain. However, any harsh scrubbing, scratching or acid based cleaning products 

will damage the surface of your towel rail. Cleaning with a soft cloth and a non-abrasive 

cleaning agent will give the best results.
6

Содержание VS900H









Отзывы: