16
1
Unfasten the carton’s
flaps and place it
against the wall with
the lower flap folded
back and resting flat on
he floor.
2
Prick out the four drill
holes though the
packaging (
without dril-
ling
)
3
Remove the packaging.
Carefully mark the
drilling points with a
pencil (
draw a cross,
4cm wide
). Drill the
four holes.
The pins supplied with
the device are of the
standard type.
In case of a particular
stand, use appropriate
pins.
4
Position the
four hooks
and
screw
them tight.
Attach the
device and
lock it in
place.
A
503 mm
262 mm
SOL
4) How to install the device
Power Measurement
A
600 W 1108 mm
750 W 1433 mm
900 W 1758 mm