WATER COOLED HEAT PUMPS
VERTICAL MODELS
SIZE 160 TO 720
INSTALLATION, OPERATION AND MAINTENANCE
SERIES
KHPE-160 / KHP-720
Each heat pump has been operated and
verified out prior to shipment. Failure to
operate after installation indicates damage in
transit or improper installation.
INSPECTION
Check packaging during unloading. Note
transit damage on all copies of bill of lading.
Inspect heat pumps for hidden shipping
damage after packaging is removed.
Purchaser must file transit damage claims
promptly with Freight Company.
HANDLING
Always handle units upright on their base.
Moving a vertical unit on its side may
damage internal parts and displace oil from
the compressor's crankcase.
STORAGE
If job site storage is necessary, place the unit
in a clean, warm, dry area. Follow
instructions under Handling.
PLACEMENT
Install heat pumps in a level plane and locate unit to ensure that proper access is available to all
service panels including that of filter removal.
For Vertical Units: Install the heat pump with a piece of sound insulating material between unit and
floor to avoid possible transmission of noise into the building structure. (rubber backed carpeting
will suffice for vertical models). For units installed in closets adjacent to conditioned space,
provide insulated return air ducting with at least one 90o elbow or provide a sound baffle between
the return air grill and unit filter.
