Thermopatch NL-35, Руководство пользователя

Страница: 19 / 24

19 BACK TO INDEX
For more information about our products and how to contact us, please visit thermopatch.com
Problem Possible cause Solution
The machine
does not
switch on The plug is not connected
The switch has not been switched to 'on'
Main fuse is not working
Check the connection to the electric mains and if the
machine is plugged in
Press the main switch to 'on
The fuse is placed in the fuse holder next to the power
cord connector.
The heating
platen does not
heat up Faulty heating element
Problem with the main board
Temperature set too low
Check the connections and the condition of the wiring
Remove the heating element
Check the on-screen messages and refer to the section
error messages, page 9
The heating
element
overheats
Problem with the probe of electronic board
Check de messages on the LCD screen, page 9
Contact your supplier
The press head
does not lower
The buttons are not working
Leaking cylinder
Too low pressure on air supply
Check the connections
Check the seals and all connections, contact your supplier
Check the valve couplings, contact your supplier for
replacement
Check that the air supplied is above 3 bar
The press head
does not
come up
Faulty solenoid control valve
Leaking cylinder
Check the valve couplings, contact your supplier for
replacement
Check the seals and all connections, contact your supplier
The press head
stays down after
pressing
The timer is not counting down See above
Troubleshooting