manualshive.com logo in svg

Thermopatch NL-30, Руководство пользователя

Поделиться
Скачать
Thermopatch NL-30 Скачать руководство пользователя страница 5

5

BACK TO INDEX

For more information about our products and how to contact us, please visit thermopatch.com

3. Assembly and installation 

3.1 Assembly and installation

Unpacking
•  Remove the wooden protective crate.

•  Use a 10 mm spanner to remove the four screws with which the machine is screwed to the pallet

•  Lift the machine onto the work table by means of the tongs that are mounted.

•  Place the foot extender as shown in the photo below.

3.2 Electrical installation
Take the NL-30 v.3 out of the box and place the machine on a stable work table in the vicinity of a grounded 

socket. The NL-30 v.3 is connected to the power supply (230 V alternating current) with the supplied mains 

cable. The NL-30 v.3 is grounded and equipped with two fuses type 16 A.

ATTENTION!

 

Mount the foot extender BEFORE loosening the transport screws.

1. Mount the 

foot extender 

behind on the right

2. Connecting 

power cable

Содержание NL-30























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды