T
ECHNICAL SPECIFICATIONS
I
NTRODUCTION
Supply voltage:
85-265Vac 50/60Hz
Standby power:
＜
1W/2W(WiFi version)
Max load:
16A(electric heating)/3A(water heating)
I
NSTALLATION
The 6A seires is an intuitive programmable thermostat used to control electrical floor heating system or
water heating system. It will keep home at comfortable temp whilst minimizing energy use. Install the
app on your smart phone to control heating system remotely with the WiFi thermostat .
01
02
IP class:
IP21
Cable specification:
≤2.5mm²
Connect the thermostat
according to the
connection diagram.
Mount and reassemble the
thermostat.Fasten the
thermostat to a socket or
an exterior wall box by
driving the screws through
the holes in each side of the
thermostat.
Put the frame on.
Click the display
module back in
place
Press your fingers
under the side of
the front part and
pull toward you.
》
》
Step 1:
Step 2:
Step 3:
Step 4:
Suggestion:
Please keep the max load around 90% of 16A to prolong the lifetime.
》
W
IRING INSTRUCTION
MAX LOAD: 16A
SENSOR
L1
N1 N
L
FLOOR
SENSOR
POWER
85V-265V
50/60Hz
IP 21
N1
N
L
L1
S2 COM S1
POWER
FLOOR SENEOR
MAX LOAD: 16A
SENSOR
L1
N1 N
L
FLOOR
SENSOR
POWER
85V-265V
50/60Hz
IP 21
N1
N
L
L1
S2 COM S1
POWER
FLOOR SENEOR
ROOM -OUT SENEOR
Please select floor sensor, Room-out sensor or floor
sensor and Room-out sensor to run the thermostat
if you install it on bathroom or wet location.
Room-out sensor is used to detect the temp in the
whole room. Room-out senor sold separately.
