ThermoFLUX Minitherm AQUA, Руководство пользователя и по обслуживанию

Страница: 28 / 44

Minitherm AQUA
28
5.3.4.2 STAND BY mode with room thermostat connected
1. FUNCTION STAND-BY SET ON – room thermostat shuts down
stove
When room thermostat sends signal that desired temperature in the room is reached
(contact is open/temperature is reached) stove will shut down after 2 minute (factory
settings- in the case that temperature in the room changes all to prevent constant
turning on and off of the stove) on display is written tOFF-WAITING REQUEST.
When room thermostat gives signal that room temperature is low (contact closed/
temperature needs to be reached) stove will start ignition and on display is written
tON.
Remark: Stove functioning primarily depends on temperature of the air inside of
stove and factory settings inserted. If stove is in state of WAITING COOLING (air
temperature is reached), eventual request of the thermometer will be ignored.
2. FUNCTION STAND-BY SET OFF – room thermostat gives signal
to the stove to work in POWER 1
In the case that function STAND BY is not activated ( OFF ) stove will work in power
chosen by the user and when desired temperature is reached stove will modulate (will
not shut down but working power will change to lowest).
Stove will shut down only if temperature of the air in the system is 80 degrees
C , and
on display is written WAITING COOLING . Stove will start again when temperature in
the system drops down below set temperature.
5.3.5 Option Buzzer
B
UZZER
is used in the case that user want to hear sound signal from the stove in the
case of activated alarm (set ON ), or without sound signal (set OFF ). Option BUZZER
is activated by pressing of button SET , and after that with buttons 5 or 6 we choose
item MENU 05- OPTION BUZZER. By pressing of the button SET choice ON or OFF
is opened (with buttons 1 or 2 we are selecting option and confirmation is done by
pressing SET ).
5.3.6 Filling of spiral dispenser
Filling of spiral dispenser with pellet is done when pellet is loading for the first time
or in the case of empty silo. Process of filling of spiral dispenser is set to 90 seconds.
Filling of spiral dispenser is done by pressing of button SET , and after by pressing
buttons 5 or 6 we choose MENU 06-FILLING OF SPIRAL.
Filling os spiral is activated by pressing of button SET .
Prior to start up of the stove, check combustion chamber. There is a
big possibilty that there are some leftovers from pellet in it while spiral
dispenser was filled. Combustion chamber needs to be empty and then
ignition process can be initiated .