OPERATING INSTRUCTIONS
TROUBLE SHOOTING
Note:
In the event of the unit shutting down due to being connected to a power source prior to being filled
with water perform the following steps:
Unplug the unit and let the unit cool down for a minimum of 20 minutes.
Fill the unit with water after the cool down period.
Press the ‘RESET’ button at the back of the unit.
Note: White substance in water means there is too much scale deposit in tank. This requires the unit being
disassembled and drained.
Note: Grey or brown substance in water indicates the internal magnesium anode has dissolved (see
Maintenance section for more info)
Thermostat
Thermostat (Operating Setting)
Note:
Use above table to keep unit at desired temperature levels
Cold; heater is switched off.
Automatic frost protection active; the device switches on if the water temperature falls
below 45
o
F / 7
o
C.
Water temperature has risen by approx. 77
o
F / 25
o
C.
Water temperature is +/-165
o
F (+/-75
o
C).
Energy-saver mode/reduced energy consumption:
Greater energy savings are possible if the water temperature is set to a maximum of +/-131
o
F
(+/-55
o
C). This also reduces the risk of damage to the device.
05
2.6 Gallons Water Heater -
User Manual
TM
Содержание 2.6 Gals
Страница 8: ...2 6 Gals TM...