ThermoFisher Scientific QuantStudio 6 Pro, Руководство пользователя

Страница: 49 / 216

If the connection between the instrument and the location that was selected to
save the data file is interrupted, the instrument completes the run. The data file
is saved on the instrument. The data file must be transferred to another location
manually (see “Transfer data files at a later time” on page 76).
5.
(Optional) Select the Export run results with checkbox.
For more information about this setting, see “Overview of customized data
export” on page 49.
To import a different export setting, see “Import an auto export setting” on
page 53.
6.
(Optional) Edit the run method (see page 55).
7.
(Optional) Edit the plate (see page 62).
8.
Load a plate into the instrument (see page 50).
9.
Tap Start run , then confirm that a plate was loaded.
The confirmation page can be disabled.
The status dial is displayed. The status dial contains the following information:
• The block temperature
• The elapsed time of the run
• The status of the run
See Figure 7 on page 48.
For options during a run, see Chapter 5, “Options for a run”.
Overview of customized data export
The instrument can perform the primary analysis and the secondary analysis of the
data, then export the results.
The instrument has a default export setting.
The export settings can be customized. The instrument will perform the primary and
secondary analysis according to the export setting file.
The export settings are customized in the QuantStudio
™
Design and Analysis
Software v2, then transferred to the instrument. The export settings are in a JSON file
format.
The export settings cannot be created or edited on the instrument.
Chapter 3
Create and run plates on the instrument
Overview of customized data export
3
QuantStudio ™ 6 Pro and 7 Pro Real-Time PCR Systems User Guide
49