background image

 

Chapter 2 | Getting Started 

2.2 Universal Power 

Supply Assembly  

A universal power adapter (Catalog Number LSTAR-PWR) 
with US/Japan, Euro, UK/Singapore, Australia/New 
Zealand and China wall plug plates is included with the 
meter. This universal power adapter is specifically for use 
with this meter. Use of other power adapters can damage 
the meter and will void the warranty. 

Note: The power adapter plug has two prongs that allow 
the power adapter to be locked onto the meter. These two 
prongs must be properly aligned when connecting it to 
ensure it is fully connected and locked onto the meter.  

 

Unpack the power supply provided with the meter. 

 

Select the appropriate wall plug plate for the power 
outlet that will be used.  

 

Slide the appropriate wall plug plate into the groove 
on the back of the power adapter. 

 

 

 

Connect the assembled power adapter to the meter 
input. 

a.

 

Locate the two slots on the meter power input. 

 

b.

 

Align the two tabs on the power adapter 
connector with the two slots on the meter 
power input. 

  

  

c.

 

Insert the power adapter connector into the 
meter power input and twist clockwise to lock 
the connection.  

 

 

 

Connect the assembled power adapter to a power 
outlet. 

 

You are now ready to turn on the meter. 

 

 

CAUTION: Use of a surge protector or 
uninterrupted power supply (UPS) is 

recommended, as an unintended power 
surge of electricity to the meter may 

damage the meter and void the warranty. 

 

 

 

 

 

 

Содержание Orion Lab Star PH111









































Отзывы: