6
Castor Wheel Set
Every heater comes with the feet and castor wheel set, to assemble, see the diagram below.
Step 1
: Loosen the locking plate screw and rotate the locking plate
out of the fixing slot (See RHS images).
Then remove the mounting bracket from the heater.
Step 2
: Use the wall-mounting bracket as a template for marking
the fixing holes. Position the mounting bracket in the correct
position on the wall and mark the screw-holes through the 4
mounting holes (See diagram on page before).
Step 3
: Install the 4 fixing devices in the wall, ensuring they are
more than adequate to safely fix the heater to the wall.
Step 4
: Fix the bracket firmly to the wall using all 4 mounting locations.
Step 5
: Mount the heater on the bracket so the bracket protrusions
fix into the 4 slots on the back of the heater. (See RHS diagram).
Rotate the locking plate into the fixing slot and tighten the screw
To remove the heater, reverse the above operation.
