__________________________________________________________________________________
5 |
P a g e - S e i t e
ATTENTION! HOT!
These products contain electrical heating
elements. Never touch in case of hot surface of
the product or when the product is in operation.
This affects also all metallic parts, which can
reach high temperature during operation. There
is danger of combustion.
INFLAMMATION AND EXPLOSION RISK!
The product is not explosion-proof. It should
never be integrated into tempering processes
where liquids handled may support explosions.
This covers also applications where gas/air-
mixtures may occur. The product must not be
used to heat explosive media or those
developing explosive gases when heated. The
product must be installed only outside of
hazardous locations.
General Product Information
The products consist of resistance heating wires
embedded in polymer and glass-fiber fabric
materials for industrial use. Depending on the
requirement they are designed with the
following features:
-
resistance heating elements in various alloys
-
Layers of Silicone rubber
-
Layers of silicone reinforced glass-fiber
fabrics
-
Metal plates or other fixation types for
installation
-
Built in thermostats
-
various operating voltages
-
various performance ratings
They are used to heat-up, maintain and
compensate heat losses on standard drums sizes
110L and 200L. The maximum admissible
product temperature varies in design and in the
different insulation material. The maximum
achievable withstand temperature, however,
depends on the specific operating conditions. It
may be influenced by the heat conductivity of
the materials and media to be heated as well as
by the throughput, the ambient temperature,
the insulating material and the insulation
thickness.
ISOPAD offers a wide range of different versions
tailored individually to the application. Please
contact us for more information. (see last page
for contact information)
Note:
For individual specifications please refer to
the product label or type plate. In the case of
installation difficulties or special requirements
it is recommended to discuss and agree
suitable installation procedures. In case of
doubt or if necessary please contact us. (see
last page for contact information)
Additional Safety Instruction
(product related)
Attention!
When using electric surface heating equipment,
basic safety precautions should be followed in
order to prevent the occurrence of burns,
electric shock, fire or injury to persons or
animals.
The following safety notes have to be followed:
-
The products are not suitable for use in
applications where they may be subject to
aggressive chemicals.
-
Prior to connecting the heating to mains,
please ensure that the mains voltage
matches that indicated on the label.
-
Check the suitability of the product for the
maximum withstand temperature both
energized and de-energized (refer to the
Technical Data in this manual and on the
label).
-
Care must be taken not to damage the
product during installation.
-
The product is electrical equipment. It must
therefore be operated only by properly
trained staff.
-
Maintenance, connection and repair have to
be performed by trained, specialized and
qualified staff.
