Page 8 of 8 Revision 1.0 Mar 2020
ProReact EN Analogue Cable Test Kit Instructions
Document Ref. PACC-CTK
www.thermocable.com
Call: +44 1274 882359
•
M
A
D E
I N T H E
U
K
•
M
A
D
E I N T H E
U
K
Email: [email protected]
Thermocable (Flexible Elements) Ltd,
Pasture Lane, Bradford, BD14 6LU
United Kingdom
Troubleshooting
If the ammeter does not move after the green button is pressed, check the cable is attached correctly to the power supply unit.
Disconnect power to the power supply unit and check the fuse on the front panel (see Figure 3). The fuse can be removed by twisting
the fuse plug anti-clockwise.
If the power supply unit red Stop button does not light up after connecting the unit to a mains supply. Check the fuse on the mains
lead is working and check the fuses on the rear of the power supply unit located directly below the mains lead socket.
