THERMOBILE C17, Руководство пользователя

Страница: 4 / 19

4
This technical manual must be kept in good condition inside the unit.
PLEASE READ BEFORE CONTINUING
Features, illustrations and descriptions contained herein are, to our knowledge, accurate at the time of appro-
val for printing. We reserve the right to change, to no longer offer certain features or to stop production of a
model without notice, and is not a commitment on our part.
Security rules
-
Do not cover, stop up or obstruct the openings of the unit, this could cause malfunctions!
-
Do not restart the compressor repeatedly within a short period of time may result in overheating and da-
mage to the compressor.
-
Do not operate the equipment outside its recommended temperature range. Use of the product outside the
temperature range specified in the technical characteristics, can cause frequent restarts of the cooling system
which may damage it.
-
Never make any changes to the settings that were performed by a qualified professional.
-
Never touch the hot parts and / or moving parts.
-
Do not place or hang anything on the unit.
-
All work on the device is prohibited before having disconnected the power supply.
-
Do not change the original settings, security or control, to the extent that it could create dangerous situa-
tions.
-
In the case of a long period of non
-
operation, disconnect the power supply of the device. When putting into
operation, it is advisable to call in qualified personnel. Generally all repair work or maintenance should be
performed only by authorized and trained personnel.
Caution
Electrical components, running mechanisms can cause injury. To protect themselves from these risks during
installation or maintenance, power supply should be disconnected. Everyone involved in the installation or
maintenance of this equipment must respect the health and safety rules, and comply with the laws of the
country of use.
Before performing service or maintenance operations on system, turn off main power switch of the unit.
Electrical shock could cause personal injury.
This unit shall be installed in accordance with national wiring regulations.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly
qualified person in order to avoid a hazard.
The means for disconnection from the supply having a contact separation of at least 3 mm in all poles.
Recycling
This device uses R
-
410A refrigerant, before final disposal or performing maintenance operations, carefully
collect the fluid of that unit. Never reject in the environment, only use a compatible recovery equipment.
Please observe the national regulations and procedures to protect the environment