THERMOBILE Bio Energy 2, Руководство пользователя

Страница: 26 / 91

26 40.020.953 - rev.
05 - 2015
Bio Energy series
English
The flame extin-
guishes immediately
after ignition; the
control light is on. 7 There is water or sedi-
ment in the fuel tank. Clean the fuel tank and the
fuel filter, see fig. 3. User
8 The fuel supply pipe is
blocked: The fuel flows
back into the fuel tank
through the return pipe. Clean the fuel supply pipe or
replace if necessary. User
9 There is no proper flue
draught. Check whether the flue is fit-
ted according to the instruc-
tions, see "flue". User
Check the flue for leakage. User
Clean the flue if necessary. User
See faults: 3 and 4.
The air combustion
fan keeps running,
while the hot air fan
has stopped and the
heater has cooled
down. 10 The combustion thermo-
stat is defective.
Replace the combustion
thermostat. User
There is soot forma-
tion in the combus-
tion chamber and in
the flue. 11 The combustion air fan
does not work.
Check the motor and replace
if necessary. Dealer
There is soot forma-
tion in the combus-
tion chamber and in
the flue. 12 There is insufficient sup-
ply of combustion air.
Clean the holes in the vapor-
iser. User
Check the operation of the
combustion air fan. User
13 The flue draught is too
high or irregular.
Position a flue stack valve,
see "flue".
Adjust the flue to the correct
pressure, see § 5.3. Dealer
See faults: 9, 12 and 13..
There is leakage
between the bottom
of the control panel
and the vaporiser. 14 There is leakage
between the bottom of
the control panel and
the vaporiser.
Adjust the pressure on the
seal cord. User
Replace the seal cord. User
Fault Cause Solution Action