THERMOBAR AB, SÅÅ 406, 837 97
ÅRE • +46
647-
66 42 04 • [email protected] • THERMOBAR.SE
ThermoBar 30
– installation, user instructions and care
Finally your product from ThermoBar is here! We would like to thank you for choosing
ThermoBar. We suggest you read through this entire document before you assemble
and install your ThermoBar. You will then know not only how to install it and use it
correctly, but also how to best take care of it so it will last for many years. At
thermobar.se
you will also find a number of really helpful instructional films with
more information and advice on most of our products.
NB!
• There is a foil heater and thermostat placed under each ThermoBar’s inner base.
ThermoBar’s guarantee does not cover troughs that have damage to the inside base,
so please make sure that your horses don't put their hooves in the trough.
• The person who installs and oversees the use of the ThermoBar is responsible for
making sure it is assembled, positioned and used correctly.
• We recommend that you always remove the power plug from the power source and
empty the ThermoBar when it is not in use.
• Never store your ThermoBar upside down outside – water can get into the electrical
connections when it rains.
• We recommend that the power cable (high voltage) is a maximum length of 50m. If
you want to use a longer cable, please consult an electrician.
WARNING!
Children and people with limited physical, sensory or mental abilities or a
lack of experience and knowledge should only use a ThermoBar under supervision or
once they have been clearly instructed how it is safely used, and only if they clearly
understand the risks associated with using a ThermoBar. Children should never be
allowed to play with a ThermoBar. Children should not be allowed to clean or
maintain a ThermoBar without supervision.
Included in your delivery:
✓
1 ThermoBar 30
✓
1 low-voltage cable (24-volt, 2 meters, 10
meters or 20 meters) with plug
✓
1 transformer, with a two-metre 230-volt
cable and a regular wall plug
✓
2 drain stoppers
✓
2 pre-drilled wooden brackets
✓
4 screws for mounting
✓
1 strap
✓
2 supports
Assembly and installation
1. ThermoBar 30 is designed to be installed
in the corner of a stable stall or box. The
trough can be used all year round, even in
the summer as it will help to keep water
fresh and cool. If you are worried that a
horse might damage the ThermoBar, simply
build a protective barrier around the front.
2. Mount the pre-drilled wooden supports
that the trough will rest on, one on each side
of the corner. The height should be low
enough for the horse to drink from, but high
enough for a bucket to fit under the trough to
make emptying and cleaning easier. Mount
the wooden supports with a gap of 10 -12
cm between them so there is room for the
power cables.
3. The trough is held in place with a strap
that is pulled through the two plastic loops.
Put the plastic loops about half way and 2cm
outside the trough so it can be easily
removed if needed.
