manualshive.com logo in svg

Thermo Valve Oven, Руководство по эксплуатации


Поделиться
Скачать
background image

Chapter 2

Valve Installation

Installing Valves in the Heated Oven

26

Operating Manual

5. Verify there are no major leaks in the fittings.

NOTE

Applying pressure to this side of the actuator will ensure that the actuator stays in the ccw 
position.

6. Take the other 1/8” piece of nylon tubing and place it in the upper fitting on 

the actuator. Be sure the tube passes through the ferrule in the fitting. Tighten 
the fitting using the 3/8” open end backup wrench.

7. Connect the opposite end to the solenoid fitting.

NOTE

The tubing can be released from the solenoid by pushing down on the solenoid fitting and 
pulling out on the tubing at the same time. 

Step 5. Installing the Actuator to the Valve Standoff

1. Carefully fit the actuator into the valve standoff being sure not to rotate the 

valve.

2. Once the two square fittings on the actuator and valve are coupled, tighten the 

collar on the valve. Be sure this fitting is very tight so the actuator will not 
rotate on the valve standoff.

3. Slide the valve and actuator assembly up or down to the desired location and 

tighten the upper collar to hold the valve and actuator in place.

Содержание Valve Oven































































Отзывы:

Нет отзывов

Похожие инструкции для Valve Oven

GE JRS04 Owner'S Manual preview
JRS04
Бренд: GE Страницы: 20
Samsung NQ70 700D Series User Manual preview
NQ70 700D Series
Бренд: Samsung Страницы: 92
CDA SV451 Manual For Installation, Use And Maintenance preview
SV451
Бренд: CDA Страницы: 32
Rangemaster ECL45SCBL/BL User Manual & Installation & Service Instructions preview
ECL45SCBL/BL
Бренд: Rangemaster Страницы: 40
Omega OF694CX Instructions For Installation And Use Manual preview
OF694CX
Бренд: Omega Страницы: 20
Fagor MO-25 M Instructions For Use Manual preview
MO-25 M
Бренд: Fagor Страницы: 70
Comfee CFO-BB102C Instruction Manual preview
CFO-BB102C
Бренд: Comfee Страницы: 36
GE JEG3002BBE Manual preview
JEG3002BBE
Бренд: GE Страницы: 44
SAIKO TO-60E Instruction Manual preview
TO-60E
Бренд: SAIKO Страницы: 9
John Lewis JLBIOS631 User Manual preview
JLBIOS631
Бренд: John Lewis Страницы: 48
Menumaster DEC1000VP series Owner'S Manual preview
DEC1000VP series
Бренд: Menumaster Страницы: 212
Fagor FG299 Instruction Manual preview
FG299
Бренд: Fagor Страницы: 16
Asko OP8620 Instructions For Use Manual preview
OP8620
Бренд: Asko Страницы: 28
BALAY 3HEB9015 Instructions For Use Manual preview
3HEB9015
Бренд: BALAY Страницы: 48
DAEWOO ELECTRONICS KOR7LC7 Owner'S Manual preview
KOR7LC7
Бренд: DAEWOO ELECTRONICS Страницы: 25
Magic Chef MCFR17TTB User Manual preview
MCFR17TTB
Бренд: Magic Chef Страницы: 20
Omcan CE-ES-0004-RH Instruction Manual preview
CE-ES-0004-RH
Бренд: Omcan Страницы: 16
Sears 721.66312500 Basic Field Manual preview
721.66312500
Бренд: Sears Страницы: 39

Бренды по названию

Популярные бренды

Загрузить еще бренды