Orion 900A Printer Instruction Manual
The Battery
6
REPLACING THE BATTERY PACK
See Figure 4.
1. Remove battery cover on rear panel by sliding cover down.
2. Remove battery pack by pulling gently. Disconnect the wire leads by
pulling straight out from the internal connection.
3. Insert connector on new battery pack into the internal portion of the
printer until it is secure. This is a polarized connector and can only be
inserted one way. Position the battery pack into compartment and
replace cover.
4. Plug in the printer and charge the battery for twelve hours.
Note:
Battery must be disposed or recycled properly.
Figure 4
