Chapter III
Paper Insertion
See Figure 3.
1. Flip open the top portion of the front printer case.
2. Tear off approximately the first 8 inches of printer paper from the roll.
3. Hold the roll in one hand with the paper coming off the bottom of the
roll. Insert the end of the paper into the print mechanism. Insert under
the plastic section and above the lower metal piece.
4. Turn the printer on by sliding the switch to the right, then press line
feed button. The paper should move through the print mechanism and
out of the top. If not, check to make sure the paper is inserted
properly.
5. Hold the paper forward while flipping the top cover closed so it
remains on the outside of the printer case.
Note
: Do not apply tape over printout. This will cause fading. Tape around the
edges or staple.
printer
900A
model
on
line
feed
Orion 900A Printer Instruction Manual
Paper Insertion
4
Figure 3
