Medical Devices -Touch Controller
11
| Transport and Handling
Electrical Protections
These devices are equipped with 2 safety fuses
(phase and neutral) with integral protection against
electric shocks, short circuits and over-currents and
according to the standards for laboratory devices.
The fuses can be accessed from the front: Open the
refrigerator door and the fuses will be found behind the
front control unit panel. The activation current of the
fuses must be between 10 A and 16 A.
Figure 3. Fuse Housing
Set-Up Operations
Before turning on the appliance, it is necessary to check
that it has not been damaged during transport, handling
and installation.
Use of the Internal
Compartment and Material
Storage
The stainless-steel rack system allows for the installation
of fully extractable drawers on telescopic guides with
"bayonet connection".
Drawers Installation
Insert the guides into the special slots of racks (
)
and pull out the telescopic guides by gently pressing on
the white lever (
), install them on the drawer and
fill the drawer on the guides installed on racks (
).
Figure 4. Installation of drawer on rack
Figure 5. Guides Installation
Figure 6. Pulling Guides Out
The replacement must be done by
qualified personnel.
-
Check the condition of the packaging
(it must not show dents and/or
breakages).
-
Check the condition of the external
frame (it must not show dents and/or
breakages).
-
Check the condition of the power cord
(it should not have scratches or cuts).
-
Check the wheels are stable.
-
Check that door opens correctly and
closes hermetically.
-
Check door gaskets (they should not
have scratches or cuts).
-
Check that display do not show
cracks.
