Thermo Scientific TruNarc, Руководство пользователя

Страница: 17 / 62

Getting Started
1
Thermo Scientific TruNarc User Guide
15

To recharge the battery by connecting the analyzer to a computer
1
Connect the USB cable to the USB connector inside the connector
compartment.
2
Plug the cable into a USB port on a computer.
Setting the Date, Time, and Time Zone
You must use the Admin software to change the date, time, and time zone
that the analyzer uses (see
page 43 ).
Using the Wall Plug Adapters
Your TruNarc analyzer comes with a set of international wall plug adapters.
To install an adapter, press it into the recess in the wall plug of the AC
adapter cable, until the adapter clicks into place. To remove an adapter, slide
the release latch down and pull the adapter out.
AC adapter cable connected USB cable connected