7 Maintenance and cleaning
Thermo Scientific
24
50134830_03.2012
7 Maintenance and cleaning
CAUTION
Use only water for cleaning. Do not use caustic
liquids.
The magnetic shaker and the control unit must not
be immersed in water or cleaning solutions.
CAUTION
In case of repair, the equipment must only be
opened by an authorized service agent.
Cleaning:
Regularly clean the surfaces of the magnetic shaker (4) and the control unit
(12) with a moistened cloth.
Maintenance:
We recommend to service the mechanism of the fixating elements and the
lift (if present) at the factory after approximately 200,000 opening and/or
lifting cycles. This corresponds to a maintenance interval of 3 years at an
average usage of 250 cycles per day.
In case of necessity to repair the equipment, it should be returned to an
authorized servicing agent. The equipment must be clean and free from
harmful substances.
To avoid transport damages during the shipment, please send the
equipment correctly packed in the original packing.
Please always enclose the filled out return delivery note.
If necessary ask for the return delivery note at
Thermo
(address: see
inside of the cover sheet).
In case of ordering spares, please state equipment type and serial number.
You can obtain further technical documents (e.g. circuit diagrams, board
data) for your engineers by contacting the address on the inside of the
cover sheet.
