manualshive.com logo in svg

Thermo Scientific Sorvall ST Plus Series, Инструкция по эксплуатации

Поделиться
Скачать
Thermo Scientific Sorvall ST Plus Series Скачать руководство пользователя страница 51

3-19

Graphical User Interface

Figure 3–35: Status – Alarm Screen: Operating Details Expanded

NOTICE 

These status information fields show the same content as the “Status” screen, plus the rotor log. 

This is described in the sections 

“Status” on page 3-14 

and 

“Rotor Log” on page 3-47

, respectively.

Proceed as follows to view the alarm list with alarm details:

1.  If you wish to silence the audible alarm (and hide the alarm message) temporarily, tap the Snooze button in 

the “Info & Health Status” area of the touchscreen (see 

Figure 3–33

 for an example)

.

2.  Tap on the alarm bell icon   in the “Info & Health Status” area.

The “Status - Alarm” screen shown in 

Figure 3–34 

appears, with the latest alarm list item already expanded.

3.  To view background information about the centrifuge and rotor, tap the field header to expand the “Operating 

Details” (see 

Figure 3–35)

, “Rotor-Centrifuge Lifecycle”, “Rotor Log”, or “Imbalance Alarms” field.

4.  Tap the field header again to hide the content of the information field.

5.  Read the description and follow the instructions to correct the problem—for example: 

a.  Return to the Home screen.

b.  Press the Lid Open button  .

c.  Remove the rotor and balance the load of the buckets.

d.  Reinstall the rotor and restart the centrifuge.

6.  When you have corrected the problem, tap the 

Acknowledge

 button to acknowledge and clear the alarm.

The checkbox next to the alarm list entry is activated.

NOTICE 

If you acknowledge the alarm without correcting the problem, the alarm will return immediately.

7.  If you wish to view more alarms from the list, tap the scrollbar and drag to scroll down.

8.  Tap the desired alarm list item.

The alarm item is expanded to reveal the details.

9.  Solve the problem and acknowledge the alarm, then tap the alarm list item one more time to reduce it.

Once you have solved and acknowledged all alarms, the “Status – Good” Screen appears to confirm that 
the centrifuge is free of alarms, as shown in 

Figure 3–36

 below.

Figure 3–36: Status – Screen 

10.  Tap the 

X

 icon   in the top right corner to return to the “Home” screen.

Содержание Sorvall ST Plus Series













































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды