Thermo Scientific Sorvall ST Plus Series, Инструкция по эксплуатации

Страница: 48 / 172

3-16
Graphical User Interface
Viewing and Handling Alerts
Tapping the warning triangle icon in the “Info & Health Status” area of the touchscreen display opens the “Status
– Alert” screen shown in
Figure 3–29 below. This screen lists all alerts that are currently active. The latest alert
appears expanded to let you view the full details. You can scroll through the list and tap on any list item to expand
it and read more.
Figure 3–29: Status – Alert Screen with Alert List
On the right-hand side of the “Status – Alert” screen, there is a stack of status information fields. You can tap
and expand each field to view general information on the centrifuge and the current rotor.
Figure 3–30 shows the
“Operating Details” section expanded, with general operating information about the unit.
Figure 3–30: Status – Alert Screen: Operating Details Expanded
NOTICE These status information fields show the same content as the Status screen, plus the rotor log. This
is described in the sections “Status” on page 3-14 and “Rotor Log” on page 3-47 , respectively.
Proceed as follows to view the alert list with alert details:
1. Tap on the triangle icon in the “Info & Health Status” area.
The “Status - Alert” screen shown in Figure 3–29 appears, with the latest alert list item already expanded.
2. To view background information about the centrifuge and rotor, tap the field header to expand the “Operating
Details” (see Figure 3–30 ), “Rotor-Centrifuge Lifecycle”, “Rotor Log”, or “Imbalance Alerts” field.
3. Tap the field header again to hide the content of the information field.
4. Read the description and follow the instructions to correct the problem—for example:
a. Return to the Home screen.
b. Press the Lid Open button .
c. Remove the rotor and the buckets.
d. Install a new rotor with new buckets.
e. Restart the centrifuge.
Refer to
“Troubleshooting by Guide” on page 6-2 for a full list of errors.
5. When you have corrected the problem, tap the Acknowledge button to acknowledge and clear the alert.
The checkbox next to the alert list entry is activated.
NOTICE If you acknowledge the alert without correcting the problem, the alert will return immediately.
6. If you wish to view more alerts from the list, tap the scrollbar and drag to scroll down.