Thermo Scientific Sorvall ST 8, Инструкция по эксплуатации

Страница: 54 / 67

8
Troubleshooting
Troubleshooting by Guide
Thermo Scientific Sorvall ST 8 Centrifuge 55
Troubleshooting by Guide
If other problems occur than those listed in this table, the customer service has to be contacted.
Error number Error message Troubleshooting
E-002;
E-005;
E-008;
E-010;
E-011;
E-012;
E-015;
E-016;
E-034;
E-036;
E-041;
E-048;
E-050;
E-051;
E-052;
E-053;
E-054;
E-072;
E-077;
E-101;
E-104
Read Manual Restart the centrifuge.
If the error message appears again, inform the customer service.
E-031 Temp High! CAUTION
Hot metal parts!
Check, if the centrifuge is accessible.
Be sure, that the room temperature is within the limits.
Let the centrifuge cool down for 15 minutes.
If the error message appears again, inform the customer service.
E-017;
E-020;
E-021;
E-022;
E-023
E-078;
E-079;
E-080;
E-081;
Read Manual Wait until the rotor has stopped.
Check, if the rotor is qualified for the Sorvall ST 8 Centrifuge
(check
“Rotor Selection” on page 20 ).
Check, if the bottom of the rotor is damaged and if the rotor is
placed on the Auto-Lock correctly.
If the error message appears again, inform the customer service.
E-019 Rotor Unknown Restart the centrifuge.
Check, if the rotor is qualified for the Sorvall ST 8 Centrifuge
(check
“Rotor Selection” on page 20 ).
If the error message appears again, inform the customer service.