Thermo Scientific PRO-LINE 60-30G, Руководство по эксплуатации и обслуживанию

Страница: 11 / 30

4. INSTALLATION AND ELECTRICAL CONNECTION
4.1 General.
The user must, at his/her expense, prepare the installation site and all necessary for the
operation of the product; this involves:
•
Make available the equipment for the installation of the product;
•
Make available the power supply necessary for the use of product;
•
Make available the safety devices upstream on the power supply lines (such as
switches, circuit-breakers, ground connections, etc.) in accordance with binding
legislation
•
Make available the auxiliary services required by the unit
•
During the installation steps , never leave the enclosures of devices , without cover
or plug for input / output cables.
4.2 Transport and Unpacking.
Transport and handling devices must be made with due care in order not to damage them
and / or damage to persons or property.
Upon receipt of the device , make sure that this has not been damaged during transport
and that the packaging is intact and has not been tampered with.
If damage is detected by the transport needs to be taken, within 7 days of receipt of goods,
the steps needed to cover the damage under the provisions of supply contract.
INFORMATIONS
In the case of storage waiting for the final positioning , the product with its
packaging, should be placed in a sheltered and safe, in order to avoid damage due
to weather or impact.
The disposal of packaging must be in compliance with the requirements regulated by local
legislation regarding disposal of waste.
•
Wood : natural material non-polluting , reusable, easily recyclable, disposal must be
made using the correct methods.
•
Plastic : pollutant must not be burned ( toxic fumes ), Do not pollute the environment , the
disposal must be made using the correct methods in accordance with local laws.
11 / 30 Cod.: PL-000603X-D002G