1
2.0 UNPACKING AND DAMAGE
2.01
This product was carefully packed and
thoroughly inspected before leaving our
factory. Save all packing material if apparatus
is received damaged.
2.02
Responsibility for safe delivery was assumed
by the carrier upon acceptance of the
shipment; therefore, claims for loss or damage
sustained in transit must be made upon the
carrier by the recipient as follows:
Visible Loss or Damage
: Note any external
evidence of loss or damage on the freight bill
or express receipt, and have it signed by the
carrier's agent. Failure to adequately describe
such external evidence of loss or damage
may result in the carrier's refusing to honor
your claim. The form required to file such
claim will be supplied by the carrier.
Concealed Loss or Damage
: Concealed
loss or damage is any loss or damage which
does not become apparent until the
merchandise has been unpacked and
inspected. Should either occur, make a written
request for inspection by carrier's agent within
15 days of the delivery date; then file a claim
with the carrier.
2.03
If you follow the above instructions carefully,
Thermo will guarantee our full support of your
claim to be compensated for loss or damage
in transit.
DO NOT — for any reason — return this
unit to Thermo without first obtaining
return authorization.
In any correspondence
with Thermo, please supply the nameplate
data, including catalog number and serial
number.
1. 0 INTRODUCTION
1.01
Your satisfaction and safety are important to
Thermo and a complete understanding of this
unit is necessary to attain these objectives.
1.02
As the ultimate user of this apparatus, you
have the responsibility to understand its proper
function and operational characteristics. This
instruction manual should be thoroughly read
and all operators given adequate training
before attempting to place this unit in service.
Awareness of the stated cautions and
warnings, and compliance with recommended
operating parameters — together with
maintenance requirements—are important
for safe and satisfactory operation. The unit
should be used for its intended application;
alterations or modifications
will void the
warranty.
WARNING
AS A ROUTINE LABORATORY PRECAUTION,
ALWAYS WEAR SAFETY GLASSES WHEN
WORKING WITH THIS APPARATUS.
1.03
This product is not intended, nor can it be
used, as a sterile or patient connected device.
In addition, this apparatus is not designed for
use in Class I, II, or III locations as defined by
the National Electrical Code.
