Thermo Scientific Orion Star A216, Справочное руководство

Страница: 30 / 61

25
Thermo Scientific Orion Star A216 Benchtop and Star A326 Portable pH/RDO/DO Meter Reference Guide
Chapter 6 Temperature Calibration
5IFNFUFS"5$UFNQFSBUVSFEJTQMBZIBTBSFMBUJWFBDDVSBDZPGœ¡$"5$QSPCFT CPUITFQBSBUFBOEUIPTFCVJMUJOUP
FMFDUSPEFTIBWFWBSZJOHUFNQFSBUVSFBDDVSBDJFTVTVBMMZœ¡$UPœ¡$6TFUIJTGVODUJPOPOMZJGJUJTOFDFTTBSZ
to calibrate the temperature readings taken by the ATC probe. Since the temperature offset calculated during the
calibration is applied to all future temperature measurements, recalibrate if a different ATC probe is used.
Temperature calibration is for the calibration of an ATC probe (separate or built in to a pH electrode or ORP
electrode), the solution temperature measured by a DO probe, the membrane temperature measured by a DO probe
PSBDPNCJOBUJPOPGUIFTF*GNBOVBMUFNQFSBUVSFDPNQFOTBUJPOJTCFJOHVTFEBOEUIFEJTQMBZTIPXT."/BTUIF
temperature source icon, set the manual temperature value using the Manual Temp Value menu. The temperature
calibration menu is not accessible unless an ATC probe is connected to the meter.
*OUIFNFBTVSFNFOUNPEFQSFTT .
2. Press , , or to highlight pH Channel or DO/RDO Channel and press f3 (select) .
3. Press or to highlight Temperature and press f3 (select) .
1SFTT or to highlight Temperature Calibration and press f3 (select) .
1SFTT or to highlight ATC, Solution Temperature, Membrane Temperature, Sol & Mem Temperature
or ATC, Sol & Mem Temp UPJEFOUJGZUIF"5$QSPCFBOEPS%0QSPCFUIBUXJMMCFDBMJCSBUFEBOEQSFTT f3 (select).
1MBDFUIF"5$QSPCFBOEPS%0QSPCFBOEUIFSNPNFUFSTJOUPBTPMVUJPOXJUIBLOPXOTUBCMFUFNQFSBUVSF*UJT
SFDPNNFOEFEUIBUUXP/*45USBDFBCMFUIFSNPNFUFSTCFVTFEUPNFBTVSFBOEWFSJGZUIFUFNQFSBUVSFPGUIFTPMVUJPO
8BJUGPSUIFUFNQFSBUVSFSFBEJOHTPGUIF"5$QSPCFBOEPS%0QSPCFBOEUIFSNPNFUFSTUPTUBCJMJ[F VTVBMMZUXPUP
five minutes).
1SFTT f3 (edit) to access the numeric entry screen and edit the temperature value.
a. Press , , or to highlight a number, decimal point or negative sign; press f3 (enter)
to select the highlighted item and repeat until the temperature value read by the thermometers is
TIPXOPOUIFEJTQMBZ
b. Press f2 (done) to exit the numeric entry screen.
5IFNFUFSXJMMEJTQMBZUIFFOUFSFEUFNQFSBUVSFWBMVFPOUIF Reference Temp line, the original temperature read
by the ATC probe and/or DO probe on the ATC MJOFBOEUIFUFNQFSBUVSFPGGTFUWBMVFUIBUXJMMCFBQQMJFEUPBMM
future temperature readings on the Offset line. Press f2 (accept) UPQSPDFFEXJUIUIFEJTQMBZFEUFNQFSBUVSFEBUB
save and end the calibration and export the data to the calibration log.
1SFTT f1 (meas) to proceed to the measurement mode or press f2 (print) to proceed to the measurement mode
and export the data to a printer or computer.