18
Thermo Scientific Orion Star A216 Benchtop and Star A326 Portable pH/RDO/DO Meter Reference Guide
Calibration Editing
*OUIFDBMJCSBUJPOTVNNBSZEJTQMBZ Q)DBMJCSBUJPOTUFQ
press
f3 (cal edit)
to edit the calibration points.
2. Press
or
to highlight the calibration point to be edited and press
f2 (select)
.
3. Press
or
to highlight
Remeasure, Edit
or
Delete
and press
f2 (select)
.
B *G
Remeasure
JTTFMFDUFESFQFBUQ)DBMJCSBUJPOTUFQTUISPVHI
C *G
Edit
is selected, press
f3 (edit)
UPBDDFTTUIFOVNFSJDFOUSZTDSFFOFOUFSUIFOFXWBMVFQSFTT
f2
(done)
and then press
f2 (accept)
. Select another calibration point to edit or press
f1 (back)
.
D *G
Delete
JTTFMFDUFEUIFDBMJCSBUJPOQPJOUXJMMCFEFMFUFE*GEFMFUJOHUIFDBMJCSBUJPOQPJOUDIBOHFT
the calibration to a one point calibration, enter the slope using the numeric entry screen.
5IFNFUFSXJMMEJTQMBZBOVQEBUFEDBMJCSBUJPOTVNNBSZBOEFYQPSUUIFEBUBUPUIFDBMJCSBUJPOMPH1SFTT
f1 (meas)
to proceed to the measurement mode, press
f2 (print)
to proceed to the measurement mode and
export the data to a printer or computer or press
f3 (cal edit)
to edit another calibration point.
RmV Calibration
0OFTUBOEBSEDBOCFVTFEGPSBSFMBUJWFN7DBMJCSBUJPO"MXBZTVTFGSFTITUBOEBSE1SFQBSFUIFFMFDUSPEFBDDPSEJOHUP
the instructions in the electrode use guide. Connect the electrode and any other electrodes to be used (stirrer probe, ATC
QSPCFSFGFSFODFFMFDUSPEFUPUIFNFUFS1PXFSPOUIFNFUFSBOETFUUIFNFBTVSFNFOUNPEFUP3N7
Note: In most calibration screens,
press
f1 (esc)
to return to the measurement mode without saving the calibration.
*OUIFNFBTVSFNFOUNPEFQSFTT
f1 (cal)
*OEVBMDIBOOFMNFBTVSFNFOUEJTQMBZTQSFTT
or
to highlight
pH – Channel
and press
f2 (select)
.
3JOTFUIFFMFDUSPEFBOEBOZPUIFSFMFDUSPEFTJOVTFXJUIEJTUJMMFEXBUFSCMPUESZXJUIBMJOUGSFFUJTTVFBOEQMBDF
into the standard.
3. When the electrode and standard are ready, press
f3 (start)
*GVTJOHB4UBS"CFODIUPQNFUFSBOETUJSSFS
QSPCFUIFTUJSSFSQSPCFXJMMBVUPNBUJDBMMZTUBSUTUJSSJOHBUUIFTQFFETFMFDUFEJOUIFTFUVQNFOVPODF
f3 (start)
is pressed and stop stirring once the reading stabilizes.
8BJUGPSUIFN7WBMVFPOUIFNFUFSUPTUBCJMJ[FJOEJDBUFECZUIFnBTIJOH
stabilizing
or solid
ready
icon, and
QFSGPSNPOFPGUIFGPMMPXJOHBDUJPOT
a. Press
f2 (accept)
UPBDDFQUUIFN7WBMVFTIPXOPOUIF
Rel Value
line.
b. Press
f3 (edit)
UPBDDFTTUIFOVNFSJDFOUSZTDSFFOBOEFEJUUIFN7WBMVFTIPXOPOUIF
Rel Value
line.
i. Press
,
,
or
to highlight a number, decimal point or negative sign; press
f3 (enter)
to
TFMFDUUIFIJHIMJHIUFEJUFNBOESFQFBUVOUJMUIFWBMVFBUUIFNFBTVSFEUFNQFSBUVSFJTTIPXO
ii. Press
f2 (done)
to exit the numeric entry screen.
iii. Press
f2 (accept)
to accept the entered mV value.
5IFNFUFSXJMMEJTQMBZUIFDBMJCSBUJPOTVNNBSZJODMVEJOHUIFN7PGGTFUBOEFYQPSUUIFEBUBUPUIFDBMJCSBUJPOMPH
Press
f1 (meas)
to proceed to the measurement mode or press
f2 (print)
to proceed to the measurement mode
and export the data to a printer or computer.
