manualshive.com logo in svg

Thermo Scientific OGS 100, Руководство по эксплуатации

Поделиться
Скачать
Thermo Scientific OGS 100 Скачать руководство пользователя страница 2

ii

Heratherm

Thermo Scientific

©

 2012 Thermo Fisher Scientific Inc. All rights reserved.

This Instruction Manual is copyright protected. Rights resulting thereof, particularly reprint, photomechanical or digital 
postprocessing or reproduction, even in part, are only allowed with the written consent of Thermo Electron LED GmbH.
This regulation does not apply to reproductions for in-plant use.
The contents of this operating instructions manual may change at any time and without any prior notice. Concerning 
translations into foreign languages, the German version of these operating instructions is binding.

Trademarks

Heratherm

®

 is a registered trademark of Thermo Scientific. 

Thermo Scientific is a brand owned by Thermo Fisher Scientific Inc.
All other trademarks mentioned in the operating instructions are the exclusive property of the respective manufacturers.

Thermo Electron LED GmbH
Robert-Bosch-Straße 1
D - 63505 Langenselbold
Germany

Thermo Electron LED GmbH is an affiliate to:
Thermo Fisher Scientific Inc.
81 Wyman Street
Waltham, MA 02454
USA

Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase
to use in the product operation. This document is copyright protected and any reproduction of the whole or any part of 
this document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. 
All technical information in this document is for reference purposes only. System configurations and specifications in 
this document supersede all previous information received by the purchaser.

Thermo Fisher Scientific Inc. makes no representations that this document is complete, accurate or error-free and 
assumes no responsibility and will not be liable for any errors, omissions, damage or loss that might result from any 
use of this document, even if the information in the document is followed properly.

This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This document 
shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of Sale shall govern 
all conflicting information between the two documents.

Содержание OGS 100















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды