Installing or Replacing Hardware
Installing Baseplate-mounted Accessories
14
Nicolet iS20 User Guide
Thermo Scientific
3. Place the screws that came with the sample compartment extension kit into the holes in
the sample compartment extension, and then use the 4-in1 tool with a Phillips bit
installed to tighten the screws. (The screws should be just finger-tight.)
4. Install the sample compartment cover.
You are now ready to install baseplate-mounted accessories.
Installing Baseplate-mounted Accessories
To install the standard sample compartment baseplate (or an accessory mounted on that
baseplate), first make sure the sample compartment extension kit is installed. Then orient the
baseplate with the finger hole toward the front and lower the baseplate into the sample
compartment. The baseplate fits over several alignment pins, which hold it in place.
