Thermo Fisher Scientific
Thermo Scientific™ Multidrop™ Pico 1 Digital Dispenser Operating manual
18
Chapter 5
Running a protocol
Refer to the Multidrop Pico dispenser
Software User Guide for
information about initiating and completing a protocol run.
In this phase of the run, you load the plate, cassette, and fluids as
prompted.
Initially, you will be prompted for both plate and cassette load. Plate
and cassette load regions will be displayed as needed during the run.
You have the opportunity to adjust the cassette-to-plate height during
the run before starting the actual dispensing.
The Simulation Speed bar is displayed if you are running a simulation.
Use the bar to adjust the progress speed of the dynamic display of fluids
as they are being dispensed. You can adjust the simulation speed at any
time during the simulated run.
Fluid dispensing begins when the plate and cassette are loaded and fluid
reservoir has been filled for dispensing.
The sections of the Run Window for this phase are:
Run/Simulation
Window layout –
plate and fluid
preparation
