Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 66

Страница: 66 / 94

Maintenance

Disposal of materials

66 Thermo Scientific KingFisher Flex User Manual

Thermo Fisher Scientific

Follow laboratory and country-specific procedures for the disposal of

biohazardous or radioactive waste. Refer to local regulations for the

disposal of infectious material.

Warning

The samples can be potentially infectious. Dispose of all used

plates, disposable gloves, syringes, disposable tips, and so on as

biohazardous waste.

If you have spilled infectious agents, carry out the decontamination

procedure.

Warning

The decontamination procedure should be performed by

authorized trained personnel in a well-ventilated room wearing disposable

gloves, protective glasses and clothing.

Perform decontamination in accordance with normal laboratory procedures.

Any decontamination instructions provided with the reagents used should

be followed.

It is strongly recommended to perform the complete decontamination

procedure before relocating the instrument from one laboratory to another

or before sending it to service.

Example of decontaminants:



Ethanol 70%



Virkon™ solution 1–3%



Glutaraldehyde solution 4%



Chloramine T



Microcide SQ™ 1:64



Decon™ 90 min. 4%

Warning

The decontamination procedure should be performed by

authorized trained personnel wearing disposable gloves, protective glasses

and clothing in a well-ventilated room.

1. Prepare the decontaminant: 200 ml 4% glutaraldehyde solution (or

another agent recommended by your safety officer).

2. Empty the turntable.

3. Switch OFF the power and disconnect the mains supply cable (

Figure

3–14

Disposal of

materials

Decontamination

procedure

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды