Thermo Scientific iCAP Q, Руководство по эксплуатации

Страница: 27 / 134

System Description
Gas Supply
Thermo Fisher Scientific iCAP Q Operating Manual (P/N 1288090, Revision B) 3-13
Gas Supply
The iCAP Q MS uses argon gas to generate the inductively coupled
plasma and to control internal functions with the aid of pneumatics.
Additional gases may be required depending on the type of analysis.
Also see “Permitted Materials” on page 4-7 for more information.
Connections
Gases are introduced into the instrument at the left side, see
Figure 3-13 .
For the CCT gases ( 1 and 2 in Figure 3-13 ), stainless steel capillaries are
installed inside the iCAP Q MS from the connector to the optional
CCT mass flow controller. Two stainless steel capillaries of 3 m length
for the connection to
1 and 2 in Figure 3-13 are supplied with the
models iCAP Qc and iCAP Qs.
Argon gas is connected at 3 in Figure 3-13 . A rigid plastic tubing
(polyurethane) of 3 m length for the connection of argon is supplied
with the instrument.
Labeled Components: 1=CCT 1 gas inlet, 2=CCT 2 gas inlet, 3=argon inlet,
4=additional gas inlet, 5=additional gas inlet
Figure 3-13. Gas connection details
1
2
3
4
5