Thermo Scientific
GENESYS 30 User Guide
11
Scan
To record a scan
1. Select the data mode, ABS or %T.
2. Enter the lower and upper scan limits (minimum scan range is 100 nm).
3. Place a cuvette with a blank in the measurement position, close the lid and press
.
4. Remove the blank cuvette, place the sample cuvette in the measurement position, close
the lid and press
.
The scan plot y-axis autoscales as the data is collected.
The current measurement wavelength and ABS/%T are displayed as the scan is recorded.
Measurement mode
selection and indicator tool
Scan upper wavelength limit
field
Scan lower wavelength limit
field
Toggle cursor on/off tool
(only active when a scan is
displayed)
Message bar - look here for
instructions and reports
Wavelength and ABS/%T
values at cursor position
Baseline status
indicator
Zoom tools
Clear tool
Save tool
