Thermo Scientific Forma 416, Руководство по эксплуатации и техническому обслуживанию, Страница: 16 / 56

Table 1-4. Test Tube Racks and Adjustable-Angle Test Tube Rack Holders
The Model 416/430 Orbital Shaker is equipped with an RS-232 Serial
Communication Interface for the remote transmission of data. An RJ-11
telephone style connector is located on the rear of the shaker. Refer to
Figure 1-14.
The data is “dumb terminal” formatted, which permits connecting to a
computer or a serial printer.
Three wires are used for the RS-232 interface:
1. Transmit data (/TXD) - pin 2 DB-25 connections
2. Receive data (/RXD) - pin 3 “
3. Signal ground (GND) - pin 7 “
The data format is:
Baud . . . . . . . 1200 (9600 baud w/ jumper at J2 on Main Control Board)
Data bits . . . . . . . .8 (7 bit ASCII with leading zero)
Start bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Stop bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .none
Orbital Shakers 1-9 Thermo Scientific
Section 1
Installation and Start-Up
RS-232 Interface
Connector
Part Number Description
950040 Test tube rack 10-13mm size
950060 Test tube rack 16-20mm size
600074 Test tube rack 21-25mm size
600075 Test tube rack 26-33mm size
600076 Adjustable-angle test tube rack holder w/rack 10-13mm
600077 Adjustable-angle test tube holder w/rack 16-20mm
600078 Adjustable-angle test tube holder w/rack 21-25mm
600079 Adjustable-angle test tube holder w/rack 26-30mm
600089 2 tier microplate rack
600090 3 tier microplate rack
194024
#10-24 Pan head Phillips screws for mounting test tube holders to Thermo
orbital shaker platforms
185062
Pan head Phillips screws, washers and nuts for mounting test tube holders
to Thermo 2568 and 2569 shaker baths