Smart Accessories
6
Evolution Pro Spectrophotometer User Guide
Thermo Scientific
3.
Click OK to initialize the accessory.
Initialization reads information about the accessory and, for cell changers, moves it to
position 1.
Refer to the user guide for the accessory for detailed operating instructions.
Removing a Smart Accessory
1.
Grasp the handles or the cell holder (if handles are not present) and lift the front of the
accessory to release the baseplate from the toggle.
2.
Lift the plate off the alignment pins and remove the accessory from the sample
compartment.
3.
The software confirms the accessory has been removed.
Routing Tubing or Cables into the Sample Compartment
The front cover of the sample compartment has two openings to allow passage of tubing or
cables into the sample compartment. These openings are covered by a layer of black foam to
exclude light. Slits cut into the foam allow you to create an opening without allowing excess
light into the sample compartment.
Slits on bottom of panel
CAUTION
•
Avoid pinch hazard. Keep hands and objects clear of the accessory during
initialization.
•
Évitez tout risque de pincement. Gardez vos mains, ainsi que tout objet, à l’écart de
l’accessoire pendant l’initialisation.
•
Quetschungen sind zu vermeiden. Hände und Objekte sind während der
Initialisierung vom Zubehör fern zu halten.
•
Evitare il rischio di pizzicamento. Tenere mani e oggetti lontano dall’accessorio
durante l’inizializzazione.
•
Evite riesgos de atrapamiento. Mantenga manos y objetos lejos del alcance del
accesorio durante la inicialización.
