3
Elite PCTS Tester Operating Instructions
pH Buffer Set Selection
Elite PCTS tester features USA (pH 4.01, pH 7.00 and pH 10.01) or NIST (pH 4.01, pH 6.86, and pH 9.18) stand-
ards. Select either one to suit your requirements.
1. Press to enter setup window. Press
to select Settings. The display shows Buffer, TDS Factor and
Backlight.
2. Press
to select Buffer. The display shows USA and NIST.
3. Press
to select USA or scroll down by pressing to toggle between the two buffer standards.
4. The display shows the selected buffer with a
.
TDS Factor Setting
1. Press
to enter setup window. Scroll down by pressing
to select Settings.
2. Press
to select settings. The display shows Buffer, TDS Factor and Backlight.
3. Scroll down by pressing to toggle between the Buffer, TDS Factor and Backlight. Press
to select the TDS
Factor.
4. Press
to select the default TDS factory setting or
to adjust the setting.
5. Press
to confirm the selection of the setting. The display shows the selected temperature setting with a
.
Backlight Settings
1. Press
to enter setup window. Scroll down by pressing
to select Settings.
2. Press
to select Settings. The display shows Buffer, TDS factor and Backlight.
3. Scroll down by pressing to toggle between Buffer, TDS Factor and Backlight. Press
to select Backlight.
4. The display shows ON and OFF. Scroll down by pressing to toggle between ON and OFF. Backlight ON
increases readability in low light conditions.
5. Press
to select the desired backlight option. The display shows the selected backlight option with a .
Key Info
Scroll
Accept
EXIT
NIST
USA
USA
Settings
Temp Set
Reset
Measure
TDS Factor
Backlight
Buffer
Key Info
Scroll
Accept
EXIT
0.66
Settings
Temp Set
Reset
Measure
Backlight
TDS Factor
Buffer
Adjust
TDS Factor
0.71
Key Info
Scroll
Accept
EXIT
OFF
Measure
Settings
Temp Set
Reset
Backlight
ON
OFF
Buffer
TDS Factor
Backlight
