Dionex Reagent-Free Controller
16
Doc. 031880-04 1/12
3. Press
or
to select the installed suppressor type. Figure 13 shows
a 2-mm ASRS suppressor selected.
NOTE The SRSXCALC and AESXCALC types are not used
with the Dionex RFC-10.
4. Press
ENTER
to save the entry.
Setting the Dionex RFC-10 Flow Rate
The flow rate screen lets you enter the flow rate used in your application.
1. Press
or
until the pump flow rate screen (see Figure 14) is
displayed.
NOTE The flow rate range varies, depending on the type of
suppressor selected (see Table 1).
2. Press
ENTER
.
3. Press
or
until the pump flow rate for your application is
displayed.
Figure 13. Example Suppressor Type Selected
Figure 14. Pump Flow Rate Screen
Pump Flow Rate
Range of Flow
Rates Allowed
