background image

ROSS and the COIL trade dress are trademarks of Thermo Fisher Scientific Inc. 
U.S. patent 6,793,787. 

 

AQUAfast, Cahn, ionplus, KNIpHE, No Cal, ORION, perpHect, PerpHecT, 
PerpHecTion, pHISA, pHuture, Pure Water, Sage, Sensing the Future, SensorLink, 
ROSS, ROSS Ultra, Sure-Flow, Titrator PLUS and TURBO2 are registered 
trademarks of Thermo Fisher. 

 

1-888-pHAX-ION, A+, All in One, Aplus, AQUAsnap, AssuredAccuracy, AUTO-BAR, 
AUTO-CAL, AUTO DISPENSER, Auto-ID, AUTO-LOG, AUTO-READ, AUTO-STIR, 
Auto-Test, BOD AutoEZ, Cable-Free, CERTI-CAL, CISA, DataCOLLECT, 
DataPLUS, digital LogR, DirectCal, DuraProbe, Environmental Product Authority, 
Extra Easy/Extra Value, FAST QC, GAP, GLPcal, GLPcheck, GLPdoc, ISEasy, 
KAP, LabConnect, LogR, Low Maintenance Triode, Minimum Stir Requirement, 
MSR, NISS, One-Touch, One-Touch Calibration, One-Touch Measurement, 
Optimum Results, Orion Star, Pentrode, pHuture MMS, pHuture Pentrode, pHuture 
Quatrode, pHuture Triode, Quatrode, QuiKcheK, rf link, ROSS Resolution, SAOB, 
SMART AVERAGING, Smart CheK, SMART STABILITY, Stacked, Star Navigator 
21, Stat Face, The Enhanced Lab, ThermaSense, Triode, TRIUMpH, Unbreakable 
pH, Universal Access are trademarks of Thermo Fisher. 

 

Guaranteed Success and The Technical Edge are service marks of Thermo Fisher. 

 

PerpHecT meters are protected by U.S. patent 6,168,707. PerpHecT ROSS 
electrodes are protected by U.S. patent 6,168,707. ORION Series A meters and 
900A printer are protected by U.S. patents 5,198,093, D334,208 and 
D346,753.ionplus electrodes and Optimum Results solutions are protected by U.S. 
patent 5,830,338.ROSS Ultra electrodes are protected by U.S. patent 
6,793,787.ORP standard is protected by U.S. patent 6,350,367. No Cal electrodes 
are protected by U.S. patent 7,276,142.© 2009 Thermo Fisher Scientific Inc. All 
rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and 
its subsidiaries.The specifications, descriptions, drawings, ordering information and 
part numbers within this document are subject to change without notice.This 
publication supersedes all previous publications on this subject. 

 

 

 

 

 

 

 

Содержание Alpha DO 1000

















































Отзывы: