Thermo Scientific AI 3000, Руководство по эксплуатации

Страница: 38 / 108

2
Sampling Unit
Status LED
20 AI 3000/AS 3000 Sampling System - Operating Manual Thermo Scientific
Status LED
The status LED, located on the front side of the sampling unit, see Figure 19 , provides the
operator with indications on the instrument operating conditions showing a continuous or
intermittent light. See
Table 2 for details.
Figure 19. The Status LED
Buzzer
Two beep monotone; 0.5 seconds ON, 0.5 seconds OFF, 0.5 seconds ON indicates that the
start signal is received.
Five consecutive beep, 1 second with interval of 0.5 seconds OFF in case of error condition.
Table 2. Status LED Conditions
Condition LED
St-by Lit with continuous green light
Position zeroing, sample
preparation, washing,
injection Intermittent green light; 0.5 seconds ON, 0.5 seconds OFF
Run (waiting GC Ready) Intermittent green-orange lights; 0.5 seconds green, 0.5 seconds
orange
Firmware upload Intermittent orange light; 0.5 seconds ON, 0.5 seconds OFF
Error Lit with continuous orange light
Status LED