Thermo Scientific Agilent 1200 Series, Руководство по подключению

Страница: 37 / 58

3
Setting Up the Thermo Foundation Instrument Configuration
Configuring the Agilent LC System’s Modules
Thermo Scientific Agilent 1200 Series Getting Connected Guide for LC Devices 25
4. For the capillary pump, click the Options tab, and then select the Normal Mode or
Micro Mode option. If you select the Micro Mode option, select the flow sensor rate
( Figure 19 ).
Figure 19. Options page of the Agilent 1200 Capillary Pump dialog box
5. Click OK .
Configuring the Agilent 1200 Series Thermostatted Column Compartment
Use the thermostatted column compartment (TCC) configuration dialog box to specify its
model number.
 To specify the configuration options for the TCC
1. Follow the procedure “To add the LC modules to the Foundation instrument
configuration” on page 20 .
2. In the Instrument Configuration window, under Configured Devices, double-click the
TCC icon, and then do the following on the General page ( Figure 20 ):
Figure 20. General page of the Agilent 1200 G1316 TCC dialog box