Thermo Scientific AFC-3000, Руководство по эксплуатации

Страница: 83 / 88

UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
Operating Instructions Page 77
10 Appendix - Chromeleon Example Program
;Example program for fraction collection with the AFC-3000
Automated Fraction Collector and the following instruments:
HPG-3x00, WPS-3000SL, VWD-3x00
TempCtrl = On
Temperature.Nominal = 20.0 [°C]
Temperature.LowerLimit = 4.0 [°C]
Temperature.UpperLimit = 45.0 [°C]
ReadyTempDelta = None
Pressure.LowerLimit = 0 [bar]
Pressure.UpperLimit = 150 [bar]
MaximumFlowRampDown = 30.000 [ml/min²]
MaximumFlowRampUp = 30.000 [ml/min²]
%A.Equate = "%A"
%B.Equate = "%B"
DrawSpeed = 20.000 [µl/s]
DrawDelay = 3000 [ms]
DispSpeed = 2.000 [µl/s]
DispenseDelay = 2000 [ms]
WasteSpeed = 4.000 [µl/s]
SampleHeight = 1.000 [mm]
InjectWash = NoWash
LoopWashFactor = 0.000
PunctureOffset = 0.0 [mm]
Sampler.PumpDevice = "Pump"
InjectMode = Normal
SyncWithPump = Off
Pump_Pressure.Step = Auto
Pump_Pressure.Average = On
Data_Collection_Rate = 25.0 [Hz]
TimeConstant = 0.06 [s]
AFC.Valve = Drain
;Close the diverter valve prior to a run to avoid
accidental spillages
AFC.CollectMode = SawVertical
;Define how the drop former travels over the collection
vessels.
;Do only define once and do not change during a run or
a sequence
AFC.MovementMode = Interrupt
;Define how the diverter valve behaves between tube
changes.
AFC.TubePosition =
FractionCollection.TubePosition
;Synchronize the fraction collector position with